The ND-TG4S molten iron quality management instrument before the furnace is used for the rapid determination of the carbon equivalent (CE), carbon content (C%), silicon content (Si%), and manganese content (Mn%) of the molten iron of gray cast iron and ductile cast iron before the furnace; non-professionals can operate it after simple training; there are multiple detection lines (that is, the material or product name, and the user can add it arbitrarily according to the actual situation of the company), and for the molten iron of different grades and the actual situation of each factory, the appropriate detection line can be selected to make the detection result more accurate. The main functions are as follows:
-
Determination of carbon (C%), silicon (Si%), manganese (Mn%), and carbon equivalent (CE);
-
After the component determination is completed, the system automatically calculates the adjustment addition amount of the alloy according to the target values of the carbon, silicon, and manganese content preset by the user;
-
The measurement results are automatically saved;
-
The historical cooling curve and historical measurement results can be reproduced at any time;
-
The measurement data can be output to EXCEL for data analysis, and the measured data can also be copied to the office computer for storage and analysis through the USB interface;
Featured functions:
After the component determination is completed, the user can modify the target value according to the carbon, silicon, and manganese content required by the product and recalculate the adjustment addition amount of the alloy to make the adjusted composition of the molten iron better meet the product requirements.
Technical parameters:
-
Measurement range: CE: 2.50~4.80%, C%: 2.30~4.20%, Si%: 0.60~3.80%, Mn%: 0.10~1.40%.
-
Measurement accuracy: CE: ±0.08%, C%: ±0.05%, Si%: ±0.10%, Mn%: ±0.15%.
-
Analysis time: about 1 and a half minutes.
∷
