The purpose of the ND-TG3 carbon and silicon analyzer (carbon and silicon equivalent meter) for molten iron before the furnace is to measure the carbon and silicon elements quickly. It measures and calculates the content of carbon and silicon elements and the quality of molten iron by using the rapid measurement of specific resistance during the solidification period of gray cast iron, the number of eutectic colonies, and the iron water crystallization method.

Technical parameters of the ND-TG3 quick analyzer before the furnace:
Measurement function: Measurement of C%, Si%, CEL, ΔT, and ΔTm in the original molten iron for gray cast iron solidification;
Measurement range: C 2.1~4.2, Si 0~20, CEL 2.5~5.0, model K 200°C~1370°C;
Measurement accuracy: C±0.039, Si±0.1%, CEL±0.047%;
Measurement time: Up to 240 seconds;
Display: 4-digit LED display, character height 50mm, resolution 1°C;
Status display: "Ready" green light on the instrument, "Measurement" yellow light, "Completion" red light cycles to display working parameters: power supply 220V/AC, 50/60Hz, power 15~35VA, ambient temperature 0~50°C.

The ND-TG3 carbon and silicon analyzer (carbon and silicon equivalent meter) for molten iron before the furnace is a fast measurement of carbon and silicon elements. It uses the rapid measurement of specific resistance during the solidification period of gray cast iron, the number of eutectic colonies, and the iron water crystallization method to measure and calculate the content of carbon and silicon elements and the quality of molten iron.